To automatically disable the Destination Printers prompt (if configured) when a dockable workstation (tablet device) is attached to the stand and has access to an attached printer, leave the option 60 - Prompt for Destination Printer when docked deselected.If you define a Destination Printer Group for the Backup Printer, the workstation operator is prompted at the time of printing for both the primary printer (if it has a group defined) and the Backup Printer. Printers with the option Selectable as Destination Printer set belong to a default Destination Printer Group called All Destination Printers. Selecting a Destination Printer Group overrides the printer selected for the printer type. Click the Set for All Destination Printers link to set the same printer for each type of print job. Click the Select link to set the appropriate Printer for each type of print job.Double-click the workstation to open it.Select the property, click Setup, and then click Workstations.If you are using the printer for banquet checks, enter the hostname.Įnter the port number for the IP printer. Select 40 for Bixolon SPP-R300 and SPP-R310 Bluetooth printers.Įnter the IP address or hostname of the printer. By default, the width is set to 32 columns.

This setting determines the report width so that guest checks and reports print with center alignment. You can leave this field blank to allow configuration from a mobile device when using different printers per event. (Optional) Enter the Bluetooth ID of the printer. Set the four-digit passkey that must be entered into the device before printing.

Select the communications port for the printer. Table 37-1 Printer Configuration by Printer Type Field

Epson tmu220 net config